To Next PageTo Next PageWhat to do if the power button is not lit on my Brother Printer?
If the power button on your Brother printer is not lit, ensure the power cord is correctly inserted. If it is, try plugging the printer into another electrical outlet.
What to do if Brother Printer shows a data transmission error?
If a data transmission error appears on your personal computer when using the Brother QL printer, verify that the correct port is selected in the Printer Properties dialog box under the “Print to the following port” list. Also, check if the printer is in cooling mode (orange flashing LED). If so, wait until the LED stops flashing before trying to print again. Finally, if other users are printing large amounts of data via network, try again after their jobs are completed.
What to do if my Brother Printer QL does not print?
If the Brother QL printer does not print or shows a printing error, first, ensure the cable is securely connected and the DK Roll is correctly installed. Also, check if there is enough roll remaining and that the DK Roll compartment cover is closed. If problems persist, turn the printer off and on again. If the issue continues, it may be necessary to contact your Brother dealer.
How to fix Brother QL-580N cutter error?
If a cutter error occurs with your Brother Label Maker, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position, and the machine will turn off automatically. After the machine is off, inspect the cutter unit and remove any paper jam.
Why does my Brother Printer print labels with streaks?
If the printed label from your Brother printer contains streaks or poor quality characters, or the label is not fed correctly, the print head or roller may be dirty. Clean the roller, as lint or dirt from it might be stuck on the printer head.
How to fix Brother Printer if label is not ejected properly?
If the label is not ejected properly after printing from your Brother printer, first check that the ejection path of the label is not blocked. Next, remove and reinstall the DK Roll to ensure it is set properly. Finally, make sure that the DK Roll cover is closed correctly.
How to reset my Brother QL-580N Label Maker and delete transferred data?
To reset your Brother Label Maker, press and hold the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two seconds. Continue holding down the ON/OFF button, and press the CUT button six times. The machine will then reset, deleting all transferred data from the PC and resetting the machine to factory settings.
Why is my Brother Label Maker not turning on even though the power cord is plugged in?
Check that the power cord is properly inserted into your Brother Label Maker. If it is, try plugging it into a different electrical outlet to ensure the issue isn't with the current outlet.
What to do if my Brother Label Maker has a print or transmission error?
If a print or transmission error occurs with your Brother QL printer, turn it off and then on again. If the problem persists, it is recommended to contact your Brother dealer.
What to do if there is a cutter error on my Brother Label Maker?
If your Brother Label Maker displays a cutter error, keep the DK roll compartment cover closed and press the ON/OFF button. The cutter will move back to its normal position and turn the machine OFF automatically. After the machine is OFF, inspect the cutter unit and remove any paper jam.
General| Print technology | Direct thermal |
|---|---|
| Maximum resolution | 300 x 600 DPI |
| Network ready | Yes |
| Standard interfaces | USB |
| Compatible operating systems | Microsoft Windows 2000 Professional Windows XP Windows Vista |
| Maximum label width | 62 mm |
| Maximum label length | 1 m |
| Product color | Black |
