To Next PageTo Next PageWhy is the power button not lit on my Brother QL-580N Label Maker?
If the power button on your Brother Label Maker is not lit, check that the power cord is inserted correctly. If it is, try plugging it into another electrical outlet.
How to reset Brother QL-580N Label Maker and delete data?
To reset your Brother QL-580N Label Maker, press and hold the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two seconds. Continue holding down the ON/OFF button, and press the CUT button six times. The machine will reset, deleting all transferred data from your PC and restoring it to factory settings.
How to fix Brother QL-580N Label Maker QL printer when it does not print?
If your Brother QL Label Maker isn't printing, ensure the cable is securely connected and the DK Roll is installed correctly with enough roll remaining. Also, verify that the DK Roll compartment cover is closed. If a print or transmission error occurred, turn the printer off and on again. If the issue persists, consider contacting your Brother dealer.
General| Print technology | Direct thermal |
|---|---|
| Maximum resolution | 300 x 600 DPI |
| Network ready | Yes |
| Standard interfaces | USB |
| Compatible operating systems | Microsoft Windows 2000 Professional Windows XP Windows Vista |
| Maximum label width | 62 mm |
| Maximum label length | 1 m |
| Product color | Black |
