MATRON-Light with 2250-M Field Guide, Page 9
2.2.4 Check that “MATRON Logging” is displayed on the top line as shown above. If not, tap
on the bar at the top of the screen to reveal a drop-down list similar to:
Tap on “MATRON Logging” from the list. This mode of operation will then load.
2.2.5 Tap on
(Menu) followed by .
2.2.6 Tap on
and ensure the Time Zone is correct (GMT +00:00) and the
Language and Keyboard are as you wish.
2.2.7 Tap on
and if you wish, set Auto-naming of Projects to . This will
ensure that all your saved results have the start date of the project attached to those results
for easier identification (the format is Year/Month/Date such as 07/03/05 for the 5
th
March
2007). As an alternative (set Auto-naming to
), you can use a Project name – tap on
the default name
to reveal a keyboard and change to your required project(s)
name.
2.2.8 Tap on
(Menu) followed by .
2.2.9 Tap on the
tab to reveal:
To Next Page
Loading...
Need help?
General
