14
ZTKS0162 / Z31928 / 04
Safety
2.2 Customer Responsibilities
The customer must obey the security advice and the rules for safety, applicable local
accident prevention and environmental protection correctly for the magnet system.
Furthermore, the customer is responsible for keeping the magnet system in good
technical condition.
In particular:
• The customer must identify additional dangers resulting from the working conditions
at the site of the magnet system and provide applicable safety measures.
• The customer must ensure that the site plan meets the specified conditions
according to the site planning document for operating the magnet system.
• The customer must clearly mark the danger area around the magnet system and
post the corresponding instruction plates.
• The customer has to ensure the intended use of the magnet system.
• The customer has to inform the local fire brigade about the special risks of the
magnet system and how to react in the event of an incident.
• The customer must clearly define the responsibilities for operation and
maintenance.
• The customer must ensure that all employees working with the magnet system have
read and understood the manual.
• The customer has to provide the necessary personal protective equipment for his
employees.
• The customer has to instruct his employees at regular intervals on hazards and
safety measures.
• The customer has to instruct other persons not working on the magnet system but
carrying out work in the same room, for instance cleaning staff or guards about the
possible danger at the site of the magnet system.
• The customer must ensure that maintenance is performed according to the
schedule listed in chapter ”Maintenance Timetable” on page 56.
To Next Page
Loading...
Need help?
General
