Bruker Ascend 400'54 User Manual

38
ZTKS0162 / Z31928 / 04
Operation
5.2 Set into Operation
Figure 5.1: Start the Magnet Stand
If the magnet system is equipped with a magnet
stand with pneumatic isolators:
Set the magnet stand into operation by switching
the pneumatic controller to UP position.
Figure 5.2: Stop the Magnet Stand
For any work at the magnet system like
maintenance or refill of cryogenic agents stop
the magnet stand by switching the pneumatic
controller to DOWN position.

Bruker Ascend 400'54 Specifications

General

Brand	Bruker
Model	Ascend 400'54
Category	Laboratory Equipment
Language	English