16 (53) BRUKER BIOSPIN Operating & Service Manual Version 002
Operation
Rear Panel Description 4.2
The rear panel of the BLAH1000 E Amplifier 700-900MHz has a 500mm cable
fitted with a 15 pin DIN 41612-ERNI female connector, coming out of the rear
panel of the amplifier.
Power Supply Connector 4.2.1
Table 4.4. DIN 41612-ERNI Pin Assignment
DGND = Digital Ground for ±15V and +3,3V
PGND = Power Ground for 5 x +32V
Figure 4.3. DIN 41612-ERNI Connector Design
Pin z4 +3,3V Pin d6 not connected
Pin z8 +15V Pin d10 DGND
Pin z12 -15V Pin d14 PGND
Pin z16 +32V Pin d18 PGND
Pin z20 +32V Pin d22 PGND
Pin z24 +32V Pin d26 PGND
Pin z28 +32V Pin d30 PGND
Pin z32 +32V
E F G H
D C B A
32 30 28 26 24 22 20 18 16 14 12 10 6842
d
z
To Next Page
Loading...