Brunner KSO 33 - Page 37

9. Set the internal top
cover part
The breakthroughs are locat-
ed above the downward flue
duct and the second riser duct.
The recess in the top cover
part provides the necessary
gas slot
10. Push in the top-
mount accumulator
blind cover
Place the blind cover with
sealing rope loose onto the in-
ternal top cover part
Illustration 50: Put the
blind cover in
11. Put the top cover part and intermediate ring in place
Illustration 51: External top
cover part is laid
Illustration 52: Set the in-
termediate ring cover
12. Push in the top-mount accumulator blind cover
Illustration 53: Push in the
top-mount accumulator
blind cover
Fill the external joints of the top-mount accumulator with the high-temperature sealant, however, do not ap-
ply on the intermediate ring cover, because it must be available for removal during cleaning.
© 2021 Brunner GmbH Installation Guide KSO 33 (1.12) 37