19
PROGRAMMING THE THERMOSTAT
7. Press the up or down button until you reach the desired
temperature setting.
8. Press and hold the sleep button for about three seconds.
The set temperature will flash, indicating that it saved your
settings.
9. Close the door.
Changing the temperature time periods
After you have set your three To u ch ‘ N’ G o buttons with temperature settings for
when you’re away, home and asleep, you can program the time of day you want to
use for those temperature settings.
The thermostat has four time ranges called periods. They are identified on the
displayasP1,P2,P3andP4.
With four time period options, you have a great deal of schedule and temperature
flexibility. For example, in a household where nobody is home during the day, the
users might use P1 for the morning before they leave for work, P2 for the hours
they are at work, P3 for the period when they are home in the evening, and P4 when
they are sleeping.
In situations where somebody is home most of the day, P1, P2 and P3 can all be
assigned the same “home” temperatures, while P4 is reserved for the sleeping
hours. (To learn how to reduce the number of time periods from four to two, see
page 22.)
To Next Page
Loading...
Need help?
General
