Bryant Legacy Series User Manual

31
OPERATING THE THERMOSTAT
4. To return to your original programming schedule, press the
hold/run button. The word hold will disappear.
5. Close the door.
Using the thermostat to turn the heating and cooling system off
Here’s how to use the thermostat to turn the heating and cooling system off.
1. Open the door.
2. Press the mode button on the top left repeatedly until the
display shows off in the upper left.
3. Close the door.

Bryant Legacy Series Specifications

General

Cooling Capacity	1.5 to 5 tons
Series	Legacy Series
Compressor Type	Single-Stage
Refrigerant	R-410A
Warranty	10-year parts limited warranty upon timely registration