Bryant Legacy Series User Manual

38
ADVANCED PROGRAMMING OPTIONS
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in d egrees Fahrenheit. You can
change this to Celsius.
1. Open the door.
2. Press and hold the home and sleep buttons under the dis-
play simultaneously for about three seconds.
3. Press the mode button on the left to change it from F
(Fahrenheit) to C (Celsius).
4. Press the done button on the lower right.
5. Close the door.

Bryant Legacy Series Specifications

General

Cooling Capacity	1.5 to 5 tons
Series	Legacy Series
Compressor Type	Single-Stage
Refrigerant	R-410A
Warranty	10-year parts limited warranty upon timely registration