Bryant Legacy Series User Manual

24
PROGRAMMING THE THERMOSTAT
17. If you did not select all days when you started this process, repeat all the
steps for your remaining timeframe choice – weekdays or weekends.
18. To confirm that the thermostat has accepted your changes, cycle through the
four time periods by pressing days, selecting your time frame – all days,
weekdays, or weekends – and then pressing the period button to see the
hours assigned for each start time. Each time you press period, you will
advance to the next start time.
19. Close the door.

Bryant Legacy Series Specifications

General

Cooling Capacity	1.5 to 5 tons
Series	Legacy Series
Compressor Type	Single-Stage
Refrigerant	R-410A
Warranty	10-year parts limited warranty upon timely registration