28
PROGRAMMING THE THERMOSTAT
7. Press home, away or sleep.
8. Press the period button twice. P3 will flash on the display.
9. Press home, away or sleep.
10. Press the period button twice. P4 will flash on the display.
11. Press home, away or sleep.
12. If you did not select all days when you started this process, then repeat all
the steps for your remaining timeframe choice – weekdays or weekends.
13. To confirm that the thermostat has accepted your changes, cycle through the
four time periods by pressing days, selecting your time frame – all days,
weekdays,orweekends – and then pressing the period button to see the
Touch ‘N’ Go option assigned for each start time. Each time you press peri-
od, you will advance to the next start time.
14. Press done or close the door.
To Next Page
Loading...
Need help?
General
