SETTING UP THE THERMIDISTAT CONTROL
2
With the humidify indicator
(hu) displayed, press the
UP or DOWN button to adjust the
humidify set point. Humidity levels can
be set from 10% to 45%.
Or, to turn humidification off, press the
MODE button until “OF” appears on the
display. (See suggested settings on page 27.)
3
Press the MODE button to
select between:
a. FAN indicator displayed —
fan and humidifier on every time
humidification is needed.
NOTE: With the FAN indicator displayed,
you will realize maximum humidification,
but the air may feel cold because the heat
7
To Next Page
Loading...
Need help?
General
