Bryant Thermidistat Control User Manual

OPERATING THE THERMIDISTAT CONTROL
3
Press the SET DHUM button.
The current indoor humidity (large num-
ber) is displayed along with the
dehumidify set point (small number).
4
Press the END button.
Clean filter feature
Your Thermidistat Control reminds you
when it’s time to change or clean your filter
by displaying the CLEAN FILTER indicator.
1 Press the VACATION and
END buttons simultaneously
after you have changed or
cleaned your filter to restart the timer.
14

Bryant Thermidistat Control Specifications

General

Brand	Bryant
Model	Thermidistat Control
Category	Thermostat
Language	English