Bryant Thermidistat Control User Manual

OPERATING THE THERMIDISTAT CONTROL
5 To change the humidification set
point:
a.) Press the SET HUM
button. The “hu” indicator will be
displayed.
b.) Press the UP or DOWN
button to adjust the setting.
c.) Press the MODE
button to turn the
humidification feature off (OF).
c.) Press the END button
to end.
NOTE: In dehumidify, you may enter a set
point, choose “COOL” to dehumidify, or
turn dehumidification off (OF). In humidify,
you may enter a setting or turn
humidification off (OF).
18

Bryant Thermidistat Control Specifications

General

Brand	Bryant
Model	Thermidistat Control
Category	Thermostat
Language	English