Bryce 30K - Appendix G: Technical Specifications

Appendix G Technical Specifications
Shipping Dimensions and Weight
Height: 16 inches 40.64 cm
Width. 30 inches 76.20 cm
Depth: 24 inches 60.96 cm
Weight: 87 lbs. (39.5 kg) including accessories.
Dimensions of Feeder Assembly
Height: 14 inches 35.56 cm
Width.: 24 inches 60.96 cm
Depth: 19 inches 48.26 cm
Weight: 29 lbs. (13.2kg) including Feed Ramp
Electrical
Voltage: Selectable voltages: 100v, 120v, 220v, and 240v
Fuse Type (100 – 120 volts AC + or - 10%): One 3 AG 2 Amp Slo-Blo fuse, at 250 volts,
is required/provided.
Frequency: 50 / 60 Hertz. + or - 3 Hz.
Fuse Type (220 – 240 volts AC + or - 10%): Two 5 x 20mm. 2 Amp Slo-Blo fuses, at
250 volts, one for each leg, is
required/provided.
Environmental Conditions.
Operating. (Power On.), Temperature. 55.F - 95.F (12.C - 35.C),
Humidity. 8% - 80%
Die maximale Umgebungstemperatur betraegt 35C.
Non Operating. (Power Off.), Temperature. 42.F - 100.F (5.C - 40.C),
Humidity. 10% - 90%
Media Thickness
Minimum 0.003 inches (0.076 mm)
Maximum 0.5 inches (12.7 mm)
Effective Print Area
Maximum Height of print area – 3 inches (7.62 cm), can be split into 2 – 1½ inch (3.81 cm)
blocks
Maximum length of print line – 13 ½ inches (34.29 cm)
Print Density and Resolution.
Black
Revision C 30K USERS MANUAL Appendix G -
P/N 90-00203-001
1