Printer Tips
• Press the [ - ] minus (LESS) button to decrease the
Move Bank B value on the LCD display.
• Press the [Enter] button to select the desired value. An
Asterisk (*) will appear in front of the new selection.
• Now print out a Test Pattern by pressing the [Test
Env] button. The printer will print another test pattern.
This time the test pattern is printed using the entered
selection.
The pattern printed should look like the following example:
Head 3 Bank
Head 2 Bank
Head 5 Bank B
Head 4 Bank B
Head 6 Bank B
Head 1 Bank
When correct all lines should be straight.
• Press the [Menu] button several times to back out of
the Service Menu.
• Press the [On Line] button; now the printer is ready
for use.
Revision C 30K USERS MANUAL Section 4 -
P/N 90-00203-001
11
To Next Page
Loading...
