Bryce 30K - Page 76

Revision C 30K USERS MANUAL Section A - 4
P/N 90-00203-001
Appendix A • Bryce Office Systems 30K SETUP MENU Flow Chart
----SETUP MENU----
8.Postal Bundle Brk
POSTAL BUNDLE BREAK
Enable/Disable Break
ENABLE/DISABLE BREAK
*Off
ENABLE/DISABLE BREAK
On
POSTAL BUNDLE BREAK
eBreak Character
BREAK CHAR +NEXT
*{*} -PREV
POSTAL BUNDLE BREAK
Break Char Count
CHAR COUNT +MORE
*06 -LESS
POSTAL BUNDLE BREAK
Pause Time
PAUSE TIME +MORE
*4.00 Seconds -LESS
----SETUP MENU----
9.Pre-Purge
PURGE AT START
*Disable
PURGE AT START
Enable
PERIODIC PURGE
*Disable
PERIODIC PURGE
Enable
PURGE INTERVAL +MORE
*120 Seconds -LESS
NOZZLE KEEP ALIVE
*Disable
NOZZLE KEEP ALIVE
Enable
----SETUP MENU----
10.Feed Gap
FEED GAP
Stream Feeding
FEED GAP
*Selectable Gap
FEED GAP +MORE
*4.50 in -LESS
FEED GAP +MORE
*300 mm -LESS
----SETUP MENU----
11.ROM Revision #
ROM REV = P72693 f
MAINTCOUNT=12345678
----SETUP MENU----
12.Print Head Size
Print Head Size
*Normal Capacity
Print Head Size
Extended Capacity
e Select one of the ASCII characters 33 to 90 to use for the Postal Bundle Break. The selected ASCII character
is displayed with a * next to the character contained in the braces.
f To print a list of the Main Menu, Setup Menu and Service Menu settings, press the Test button when ROM REV is
displayed.