Using the phone
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
22
You can also press to
switch between calls.
Out of range warning
When the handset is out of
range of the base, the display
will show Searching for
base…, the backlight will turn
up to 100% to indicate the alert
message and you will hear a
warning tone. After 60 seconds
the display will show No base
link. Check base. You need
to move back within range of
the base station.
If you move out of range when
you’re on a call, you’ll lose your
connection. The handset will
automatically re-connect to
the base when you move back
within range.
Call Waiting
If you’ve got a call waiting service and it is switched
on, your phone will alert you to a second incoming
call if you’re already engaged on an external call.
To switch your call waiting service on or off, see page 47.
1. You’ll hear the call waiting tone and if you also have
caller display the display will show the number of
the caller, or the name if it matches an entry in
your contacts.
2. Select
Switch by pressing the Left option button
to answer the new call and your first caller is put
on hold.
3. Select
Switch to toggle between the two callers.
4. Press
to hang up the current call.
Mute
During a call, you can talk to someone nearby
without your caller hearing.
1. During a call, select
Mute by pressing the Right
option button. The display shows
Call muted and
your caller can’t hear you.
2. Select
Unmute to return to your caller.
1662 BT4000 UG [3].indd 22 09/04/2013 15:03
To Next Page
Loading...
Need help?
General
