If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
44 Clock/Alarm
The default time format is
12 hour.
You must enter the full date:
day, month and year.
If you didn’t set the time and date when you first
set-up your phone then you will need to do so
before you can set an alarm. The clock will also be
displayed on the handset screen in idle mode.
If you have subscribed to a Caller Display service the
time and month will be set when you receive your
first call but you will still need to set the year.
Set the time format (12 or 24 hour)
1. Select
Menu, scroll to display Clock/Alarm and
press
OK.
2. Press
to display Time format and press OK.
3. Press
or
to display either 12 Hours or 24
Hours and press OK. Saved is displayed.
Set the time and date
1. Select
Menu, scroll to display Clock/Alarm and
press
OK.
2. Press
to display Time & date and press OK.
3. Enter the time and select
Next. Enter the date and
select
Save. Saved is displayed.
1662 BT4000 UG [3].indd 44 09/04/2013 15:03
To Next Page
Loading...
