If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
32 Speed dial
If you try to save a Speed
dial entry under a Speed dial
button that has already been
populated, the display will
show Replace number? and you
will hear an error tone. You can
either overwrite the existing
entry by selecting Yes or you
can press and hold a different
Speed dial button or select No.
Save a Speed dial entry
1. From the home screen, enter the telephone number
you want to store.
2. Then, either:
Press and hold the Speed dial button
to you
want to store the number under.
Or,
Select
Options, scroll to display Set
as speed dial and press OK. Scroll to the
speed dial location number you want (1-9) and
select
Save.
The display will show
Saved as speed dial x (x
being the Speed dial button).
Dial a Speed dial entry
1. Either, press and hold the Speed dial button
to
under which the entry you want to dial is stored.
Or, Select
Menu, scroll to display Speed Dial
List and press OK. Scroll to display the entry
you want then press
. The number will be
dialled automatically.
You can allocate a name and
number to each of the Speed
dial buttons to . Button
is pre-programmed with
1571 but you can delete this
and replace it with an entry
of your choice. Once a Speed
dial entry has been stored
you can simply press and
hold the Speed dial button to
automatically dial the number
stored under it.
When you save a Speed dial
entry it is individual to the
handset you are saving it on, it
will not be copied to any other
handsets you have registered to
the base.
1662 BT4000 UG [3].indd 32 09/04/2013 15:03
To Next Page
Loading...
