BT 4000 User Manual

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Settings 39
There are two handset tones:
keypad tones and confirmation
tones. You can turn these on or
off, the default setting is On.
Keypad tones: when turned on,
you will hear a beep after each
button press.
Confirmation tones: when
turned on, you will hear a tone
after each successful action
or after an error has occurred.
This does not include the
battery charging tone when the
handset is placed on the base/
charger, low battery or out of
range warnings or tones used in
calls such as Call Waiting or
Call Intercept.
There are 5 contrast levels
to choose from. The default
setting is Level 3.
Adjust the handset ringer tone
1. Select
Menu, scroll to display Settings and
press
OK.
2.
Sounds is displayed, press OK. Press to display
Tone adjustment and press OK.
3. Press
or to display either Standard,
Increase treble or Increase bass and press OK.
Saved is displayed.
Turn the handset tones on or off
1. Select
Menu, scroll to display Settings and
press
OK.
2.
Sounds is displayed, press OK. Press to display
Handset tones and press OK.
3. Press
or to display Keypad tones or
Confirmation tone and press OK.
4. Press
or to display Tone s on or Tone s off
and press
OK. Saved is displayed.
Change the handset display contrast
1. Select
Menu, scroll to display Settings and
press
OK.
2. Press
to display Display and press OK.
1662 BT4000 UG [3].indd 39 09/04/2013 15:03

BT 4000 Specifications

General

Model	BT 4000
Answering Machine	Yes
Hearing Aid Compatible	Yes
Caller ID	Yes
Number of Handsets	1
Conference Call	Yes
Intercom	Yes
Type	Cordless
Range	300 meters outdoors, 50 meters indoors
Phonebook Capacity	50 entries
Frequency	1.9 GHz