Quick set-up guide 7
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
2. Activate the batteries as explained on page 5. If you
set the time and date on the first handset then it
will be shared with all other handsets in your multi
pack once you activate the batteries.
3. Place the handset on the charger to charge for
24 hours.
If you ever need to remove the batteries, simply
slide open the battery compartment cover and ease
out the batteries.
3 Go!
Your BT4000 is now ready for you
to use
• For instructions on making a call, go to page 21.
• For help personalising your phone’s settings,
go to page 38.
Quick set-up guide
7
Using your BT4000
on a broadband line?
If so, you need to fit an
ADSL microfilter between
the phone line cord and the
phone socket. You can get
BT ADSL microfilters from
bt.com/shop
If you use BT Infinity you
will not need to use an ADSL
microfilter. For other types of
broadband, please check with
your provider if a microfilter
is required.
1662 BT4000 UG [3].indd 7 09/04/2013 15:03
To Next Page
Loading...
Need help?
General
