BT LPE200 - Page 114

10- 22 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Electrical systems – 5000 LPE 240
Error codes
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
w
Code E141
Description Software problem.
Possible error
cause
Fault on the internal monitoring (tiller arm head),
incorrect software or circuit board.
Action 1. Restart the machine.
2. Download the program again.
3. Replace the electronic card
Code E150
Description Fault in the data communication.
Possible error
cause
Break on the CAN cable.
Action 1. Check the 119 and 120 cables and their
contacts.
2. Replace travel regulator.
Code E151
Description Tx error in data communication.
Possible error
cause
Travel regulator not responding.
Action 1. Check 119 and 120 cables and the connec-
tions on the travel regulator.
2. Replace travel regulator.
Code E157
Description Bus shut off.
Possible error
cause
CAN bus problem.
Action 1. Check 119 and 120 cables and the connec-
tions on the travel regulator.
2. Replace travel regulator.
3. Replace the electronic card