10- 24 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Electrical systems – 5000 LPE 240
Error codes
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
Code E201
Description M minus error.
Possible error
cause
Problem with switch transistor in the armature cir-
cuit inside the travel regulator.
Action 1. Check cable and connections between A1/M
on the travel regulator and connection A2 on
drive motor.
2. Replace travel regulator.
Code E202
Description Fault on sensor in travel regulator
Possible error
cause
Fault on armature current sensor in travel regula-
tor
Action Replace travel regulator
Code E214
Description CAN timeout in power amplifier.
Possible error
cause
The motor monitor is reporting an unexpected
data loss from the electronic card in the tiller arm
head.
Action 1. Check cables 119 and 120 between electronic
card and travel regulator.
2. Replace electronic card
3. Replace travel regulator.
To Next Page
Loading...
