BT LPE200 - Page 65

Electrical System – 5000 LWE 180/200 LPE 200
Error codes
Order number Date Valid from serial number T-code
225553-040 2005-05-11 723984- 660, 661, 662, 497
© BT Europe AB Service Guide LWE180, LWE200, LPE200, LPE240 9- 27
w
Code E141
Description Software problem.
Possible error
cause
Fault on the internal monitoring (tiller arm head),
incorrect software or circuit board.
Action 1. Restart the machine.
2. Download the program again.
3. Replace the electronic card
Code E150
Description Fault in the data communication.
Possible error
cause
Break on the CAN cable.
Action 1. Check the 119 and 120 cables and their contacts.
2. Replace travel regulator.
Code E151
Description Tx error in data communication.
Possible error
cause
Travel regulator not responding.
Action 1. Check 119 and 120 cables and the connec-
tions on the travel regulator.
2. Replace travel regulator.
Code E157
Description Bus shut off.
Possible error
cause
CAN bus problem.
Action 1. Check 119 and 120 cables and the connec-
tions on the travel regulator.
2. Replace travel regulator.
3. Replace the electronic card