BT LPE200 - Page 67

Electrical System – 5000 LWE 180/200 LPE 200
Error codes
Order number Date Valid from serial number T-code
225553-040 2005-05-11 723984- 660, 661, 662, 497
© BT Europe AB Service Guide LWE180, LWE200, LPE200, LPE240 9- 29
Code E201
Description M minus error.
Possible error
cause
Problem with switch transistor in the armature cir-
cuit inside the travel regulator.
Action 1. Check cable and connections between A1/M
on the travel regulator and connection A2 on
drive motor.
2. Replace travel regulator.
Code E202
Description Fault on sensor in travel regulator
Possible error
cause
Fault on armature current sensor in travel regulator
Action Replace travel regulator
Code E214
Description CAN timeout in power amplifier.
Possible error
cause
The motor monitor is reporting an unexpected
data loss from the electronic card in the tiller arm
head.
Action 1. Check cables 119 and 120 between electronic
card and travel regulator.
2. Replace electronic card
3. Replace travel regulator.