BT LPE240 - Technical Data - LPE 240; Drive Motor Specifications; Brake System Specifications

Technical data – M4 LPE 240
Order number Date Valid from serial number T-code
225553-040 2005-05-11 723984- 660, 661, 662, 497
© BT Europe AB Service Guide LWE180, LWE200, LPE200, LPE240 3- 1
3- Technical data – M4
LPE 240
Model LPE240
Drive motor
Type TSL160 A DS60
Output, kW 2.5
Duty cycle S2, 60 min
Minimum carbon brush length, mm 11
Nominal commutator diameter, mm 71
Minimum commutator diameter, mm 68
Resistance, shunt field winding, Ω at 24 C° 0.346
Resistance armature winding, Ω at 24 °C 0.0098
Insulation resistance between the windings
and motor casing
>= 1 Mohm
Weight, kg 23
Brakes
Type 1EB46-11
Braking force, Nm 48
Output, W 44
Resistance coil, Ω 12
Nominal play in actuated position, mm 0.25-0.38
Minimum thickness brake disc, mm 7.7
Thickness of a new brake disc, mm 9.7
Transmission/drive gear
Type 2-stage angle
transmission
Gear ratio 14.20:1
Oil volume, litre 1.75
Oil type
at normal temperature
at temperature < -15
o
C
Hypoid oil
SAE 80W/90
SAE 75W