4- 4 Service Guide LWE180, LWE200, LPE200, LPE240 © BT Europe AB
Preventive maintenance – P2 LWE 180/200 LPE 200
Maintenance schedule
T-code Valid from serial number Date Order number
660, 661, 662, 497 723984- 2005-05-11 225553-040
1 = The connections are re-tightened for the first time after 80 h, and
then every 1000 h/12 months.
2 = The attachment bolts are re-tightened after 80 h/ 1 month to 45 Nm.
3 = Check for leakage in conjunction with the first oil change.
4 = The oil is changed for the first time after 80 h/1 month, and then eve-
ry 3000 h/36 months
5 = The oil is changed and the filter cleaned for the first time after 80 h/
1 month, and then every 1000 h/12 months.
6 = If the truck goes into a refrigerated environment or other harsh envi-
ronment, the point is addressed at more frequent intervals.
When points with higher hour intervals are carried out the points with
lower hour intervals should also be carried out unless otherwise speci
-
fied above.
6680 Power Trak
6680.1 Check if there is any damage or cracks on
the PowerTrak spring
I
6680.2
Grease in the contact pressure spring’s guides
C/L
I: Inspect, rectify and change if necessary. T: Tighten. C: Clean. L: Lubricate.
M: Control measurement, rectify if necessary
Pos.
No.
Work to carry out
Interval in hours 5 20 80 500 1000 3000
Interval in days/weeks/months 1d 1w 1m 6m 12m 36m
To Next Page
Loading...
