Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 24- 11
Electronic card – 5710
Parameter setting of all parameters
NOTE:
Altered truck characteristics.
If you alter truck-specific parameters, truck handling will change.
Do not change any parameters unless you have the necessary skills
to do so.
Parameters
• Release the travel direction selector when “P” is displayed. The driv-
er number will be shown in the display (E).
• Use the lift/lowering lever to scroll to the parameter to be changed.
• Depress the travel direction selector (the parameter number blinks).
• Use the lift/lowering lever to increase/decrease the value.
• Depress the travel direction selector to confirm the value. (The pa-
rameter number stops blinking.)
To change other parameters, scroll to the desired parameter with the
lift/lowering lever and then repeat the operation “Depress the travel
direction selector (the parameter number blinks)”.
Complete programming and store the set value by depressing the red 0
key.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...