BT REFLEX RR E 1-3 - 29- Mast mounted hose reel - 6370; 29.1 General; 29.2 Assembling

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 29- 1
Mast mounted hose reel – 6370
General
29- Mast mounted hose reel – 6370
29.1 General
These assembly instructions contain requisite information to give trou-
ble-free installation and operation. The enclosed operating instructions
contain besides instructions also information regarding inspection and
maintenance.
29.2 Assembling
Assemble the hose reel or spring according to the drawing.
Turn the hose drum, with a fully wound hose, in the direction of extrac-
tion to preload the spring.
Preloading the hose drum:
• Right extraction clockwise.
• Left extraction anti-clockwise.
WARNING
Loaded spring.
The hose can cause injury.
Always exercise caution when working with the hose reel.
The number of turns depends on the hose length and hose diameter,
see the table. The stated values apply as guideline values.
Spring preload (turns)
The hose is pulled out from the drum once the correct preloading value
has been reached.
Hose diameter
(mm)
Hose length (m)
2.7 3 3.3 5 6 7 8.5
6.3 - - 4 3 3 3 1.5-2
8 4 4 - 3 3 - -
https://www.forkliftpdfmanuals.com/