Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 24- 23
Electronic card – 5710
Operating hours
24.6 Operating hours
When the hour meter setting is displayed, the symbol E lights up. The
time is displayed as follows:
24.6.1 Installing a new electronic card in the
truck
The A5 electronic card supplied by BT can be ordered in different
modes:
1. Completely programmed for the specific truck with the default
values preset.
=P/N for the card includingsoftware.
2. Not programmed
= only P/N for the card.
When installing a new electronic card in the truck, some parameters
must be programmed to ensure safe operation of the truck.
Use the TruckCom application to download new software to the elec-
tronic card.
For details, see the TruckCom user guide.
Adjust the R1 potentiometer on the electronic card according to
C code 6000.
Letter Time
Key time
Total travel time
Drive motor time
Pump motor time
Time until next service interven-
tion
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...