BT REFLEX RR E 1-3 - 33.3 Mast without valve on the fork carriage; 33.3.1 Dismantling the fork carriage

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 33- 5
Tilt cylinder – 6660.1
Mast without valve on the fork carriage
33.3 Mast without valve on the fork
carriage
33.3.1 Dismantling the fork carriage
• Lift up the fork carriage to the right working height.
• Remove the forks.
• Lift up the fork yoke in an overhead crane.
• Unscrew the bolts (4) and washers (3).
• Knock out the axles (5).
• Remove the fork yoke.
• Unscrew the bolts (6) and remove the tilt cylinder.
https://www.forkliftpdfmanuals.com/