BT REFLEX RR E 1-3 - 2.7 Warning and information plates and symbols RR B;E 1-8

Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 2- 11
General product information – M2
Warning and information plates and symbols RR B/E 1-8
2.7 Warning and information plates and
symbols RR B/E 1-8
The figure shows the position and significance of the plates and sym-
bols located on RR B/E 1-8.
1. Modification plate
2. Identification plate, truck
3. Capacity plate
4. Serial number
5. Hydraulic oil filler neck
6. Cab tilt lock
7. Parking brake and travel direction (accessories)
8. Lifting points
9. Hydraulic switches: Lift/lower, retract/extend mast, fork tilt-
ing, side shifting and any optional hydraulic functions
10. A) Do not walk under a suspended load
B) Do not stand on the forks
11. Max. height with rated lifting capacity
12. Identification plate, mast
https://www.forkliftpdfmanuals.com/