T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
24- 76 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electronic card – 5710
Error Codes
Steering generator, U1
1. Check the cables 62 and 129, terminals in X32 and X34 and the
terminals 509 and 511.
2. Check the steering generator.
- Regarding the carbons and carbon holders, see C-code 4100
“Mechanical steering system”.
- Armature windings.
3. If the fault remains, replace the A5 card.
Code 125
Description Steering generator error on test
Error mode Steering error
Error cause 1. Defective wiring
2. Faulty generator/carbon brushes
3. Defective electronic card A5
Comments
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...