T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
35- 6 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Main mast –7100
Assembling the mast
• Bolt the manifold block on the reach carriage wall.
• Fit the mast feeder hose with the hose clip on the reach carriage wall
(7).
• Remove the plugs on the feeder hose (2) and on the main valve (8).
• Fit the feeder hose (2) on the valve (8).
• Connect the side-shift cable in the terminal connection (9) on the
reach carriage.
• Connect the height indication cable in the terminal connection (9) on
the reach carriage.
• Remove the plugs on the tilt hoses.
• Fit the tilt hoses on the side of the mast (10).
• Cut off the upper steel band on the mast.
• Connect 48 V DC to the truck and lift the forks approx. 1,000 mm.
• Fit the forks on the fork yoke.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...