Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B,E RR B,E CC 42- 21
TV equipment – 9390
Camera mounted on fork
• The monitor can be turned on and off using a switch (4)
• Use the switch (2) to shift mode between inputs AV1 and AV2.
• In order to change the monitor’s settings, use the switch (3). Press-
ing this switch accesses a menu for changing settings for the moni-
tor’s features. The menu includes the following selection of settings:
• To change any setting, the menu option must be selected. Then use
the switch (1) up and down to adjust the setting.
• To move between different menu options, press the switch (2).
• To save new settings, hold switch (3) in or turn on and off with switch
(4).
• For further information, see Wiring diagram C code 5000.
Menu choice Alters
Bright Brightness from 1-100
Contrast Contrast from 1-100
Colour Colour intensity from 1-100
Default Resets to basic settings
Backlight Backlighting from 1-100
AV2 AV1 or AV2 when turning on monitor
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...