Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B/E, RR B/E CC 13- 1
Mechanical drive gear unit – 2550
General
13- Mechanical drive gear unit – 2550
13.1 General
This type of truck is equipped with a drive gear unit mounted on the
chassis with 6 bolts.
The transmission is integrated with the motor, brakes, and sensor
measuring speed, steering wheel direction and direction of travel, as a
complete drive assembly. The drive assembly is equipped with 360°
steering.
The transmission in this truck is a two-stage angle transmission with
conical roller bearings on the drive shaft and pinion. The bearings are
pre-tensioned approximately 5/100ths of a mm to minimise the risk of
play in the bearings.
This service instruction includes directions for dismantling and assem-
bling the drive transmission, filling and changing the oil and measures
in the event of leakage. A complete renovation of the drive transmission
is so extensive that specially trained personnel must do this in the work
-
shop.
13.2 Components/data for the drive
assembly/transmission
The drive transmission’s main components and data are shown in the
following diagram and table.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...