T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
37- 16 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Lifting devices – 7400
Troubleshooting
through the second washer, then the vertical plate and then
the first washer. Then screw the bolt tight on the piston rod.
Put the washers either side of the plate on the outer fork and
do not attempt to eliminate any clearance that remains once
the bolt is fastened. The remaining clearance will prevent the
piston rod from being damaged.
22. The slide forks have to be extended and retracted several
times in order to get the air out of the system.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...