VISIT BAOFENGTECH.COM FOR DOWNLOADS AND HELP 19
[2] Key
Press and hold this key to change the BF-F8HP PRO’s MR Display Mode
(Name, Frequency, Channel Number).
[3] Key
Press and hold this key to change the BF-F8HP PRO’s transmit power
level (low, medium, high).
Basic Operations
Power On/Off the Radio
Turning the Unit On
To turn the unit on, rotate the Volume/Power knob clockwise until you
hear a "click." If the radio powers on correctly, you will hear a double
beep after about one second, and the display will show a message or
ash the LCD, depending on the settings, for about one second. Then it
will display a frequency or channel. If the voice prompt is enabled, it will
announce "frequency mode" or "channel mode."
Turning the Unit Off
To turn the unit off, rotate the Volume/Power knob counterclockwise all
the way until you hear a "click." The unit is now off.
Adjusting the volume
Increasing Volume
Turn the Volume/Power knob clockwise.
Decreasing Volume
Turn the Volume/Power knob counterclockwise. Be careful not to turn it
too far, as you may inadvertently turn the radio off.
Using the monitor function, enabled from the VOX/Monitor key below
the PTT, you can easily adjust the volume by adjusting it to the un-
squelched static.
To Next Page
Loading...
