VISIT BAOFENGTECH.COM FOR DOWNLOADS AND HELP 23
FM Radio (FM)
The frequency range for listening to the radio is 65-108 MHz. When
listening to broadcast FM, press the key to switch between the 65-75
MHz and 76-108 MHz bands.
1. In frequency or channel mode, press the SK1 key to turn
on the radio.
2. Select the desired radio frequency with the
or keys or input
the frequency. Press the key to automatically search for a
radio station.
3. Press the SK1 key to exit FM radio.
While listening to the radio, the frequency or channel of the A/B
receiving signal will automatically switch to frequency or channel mode
for normal transmitting and receiving. When the signal disappears, the
radio will switch back to FM radio mode.
Monitor
In standby mode, press and hold the SK2 key to enter Monitor mode.
This function allows you to monitor weak signals. Release the SK2 key to
turn off the monitor mode and it will return to standby mode.
If no signal is present, pressing the SK2 key will emit noise.
Keypad lock
The radio features a keypad lock that locks out all keys except for the
three side keys. To enable or disable the keypad lock, press and hold the
key for about two seconds. You can also set the radio to automatically
lock the keypad after ten seconds via the menu.
Frequency reversal and talkaround
When there is a frequency difference between the receiving frequency
and the transmitting frequency, the radio operates in relay mode. A
short press of the key enables the reverse function. To listen to the
To Next Page
Loading...
