38
Requesting Someone Else's Position
1. After successfully acquiring the GPS position, press the key to
switch to the "My Location" information interface.
2. Press the
/ key to select the pre-programmed member
sequence (01-20). The sequence and call name will be displayed
on the first line. Select member sequences that are not marked as
"native."
3. Press the [PTT] key to initiate a position request command to the
target member.
• Disable transmission while waiting for reception.
• If the other party receives your request, they will reply with
their location information.
• The red center point represents your position, the ashing
red dot within the circle represents the other person's
position, and the bottom left corner shows the reference
distance between the two radios.
Main Menu Functions
The menu function allows you to perform operations such as selecting
ZONE, SCAN, Radio Settings, GPS, Program Channels, and Radio
Information.
Basic use
To navigate the menus using the arrow keys:
1. Press the
key to enter the main menu.
2. Use the
or keys to navigate between menu items.
3. After finding the desired menu item, press the key to select it.
4. Use the
or keys to navigate between the next set of menu items.
5. Once you find the desired menu item, press the key to select it.
To Next Page
Loading...
