VISIT BAOFENGTECH.COM FOR DOWNLOADS AND HELP 39
6. Use the
or keys to select the desired parameter.
7. When you have selected the parameter to be set, press the key
to conrm your selection. This will save your setting and bring you
back to the main menu.
8. To cancel your changes, press the key, which will reset that
menu item and exit the menu entirely.
9. To exit the menu at any time, press the PTT key.
Using short-cuts
As detailed in Appendix C: Menu Denitions, every menu item has a
numerical value associated with it. These numbers can be used for direct
access to any given menu item.
To navigate the menu using short-cuts:
1. Press the key to enter the menu.
2. Use the numerical keypad to enter the number of the menu item.
3. Press the key to enter the menu item.
4. To enter the desired parameter, you have two options: a) Use
the arrow keys as described in the previous section. b) Use the
numerical keypad to enter the numerical short-cut code.
5. To confirm your selection, press the key. This will save your
setting and bring you back to the main menu.
6. To cancel your changes, press the key. This will reset that menu
item and exit the menu entirely.
7. To exit the menu at any time, press the PTT key.
All further examples and procedures in this manual will use the numerical
menu short-cuts.
To Next Page
Loading...
