40
Quick Access Short-Cuts:
+1: Quickly enter zones selection. Up to 10 zones can be stored,
each storing 100 channels.
+2: Quickly enter the scanner settings to set the VFO scan
range, scan recovery method, and CTCSS/DCS scan.
+3: Quickly enter the radio settings (overall walkie-talkie
settings).
+4: Quickly enter the position system to set the system time,
position on/off, time zone, and position mode.
+5: Quickly enter the program channel settings (current channel
alias, frequency, power, bandwidth, display mode, channel memory,
and channel delete).
+6: Quickly query radio information (Radio ID, Firmware version,
Hardware version).
To Next Page
Loading...
