VISIT BAOFENGTECH.COM FOR DOWNLOADS AND HELP 21
Channel (MR) mode and Channel selection
The radio has two modes: Frequency (VFO) mode and Channel (MR)
mode. Channel (MR) mode is more practical for everyday use, while
Frequency (VFO) mode is useful for eld experimentation and on the y
monitoring.
In Channel (MR) mode, you can navigate up and down the channels
using the
or keys. To switch between VFO and Channel mode, press
the V/M key.
• Operation 1:Press the
or navigation key to select the channel.
• Operation 2:Input the channel numbers on the keypad. For
example, to switch to channel 12, input [0][1][2].
If the voice prompt function is enabled, the corresponding channel will
be announced by voice.
Selecting a ZONE
A zone is a group of channels with similar properties. The radio supports
up to 10 zones, with a maximum of 100 channels per zone.
Select Zone
Press the Menu key and go to Menu > ZONE.
Use the
or navigation key to select a zone, and then press the
Menu key to switch to the selected zone.
Add Zone
1. Press the Menu key to enter the main menu.
2. Select "Zone."
3. Select "Add Zone."
4. Input the zone name using the keypad, press the
Delete key to
correct mistakes. After editing, press the Menu key to confirm
and store.
To Next Page
Loading...
