36
Ensure that the radios sending and receiving GPS location information
operate on the same frequency or channel and are set to the main
frequency band. In GPS mode, you can only view location information
and cannot make normal calls. To use voice intercom, you must exit GPS
mode.
You can set the system time, GPS on/off, time zone, and GPS mode
through the position system menu. Press and hold the key to view,
share, and request location information.
GPS On/Off Settings
1. Menu: + 4 + + 1
2. Press the
/ key to select whether to turn GPS on or off.
3. Alternatively press and hold the A/B key to toggle GPS on or off.
• After turning on the position system, the screen will display the
GPS icon.
Time Zone Settings
1. Menu: + 4 + + 2
2. Press the
/ key to select the correct time zone.
Speed Unit Settings
1. Menu: + 4 + + 3
2. Press the
/ key to select the speed unit (km/h, MPH, kn).
GPS Mode Settings
1. Menu:
+ 4 + + 4
2. Press the
/ key to select the GPS mode (Beidou, GPS, or
GPS+Beidou).
Using GPS:
1. In standby mode, press and hold the key to enter GPS mode and
To Next Page
Loading...
