BTECH BF-F8HP-PRO - Page 42

42
Hear unknown voices
or noise
You may be
interrupted by radios
using the same
frequency.
Change the frequency
or adjust the squelch
level.
The radio may be set
with no signaling in
analog mode.
Change or set
signaling for the
current channel to
avoid interference.
Too much noise and
hiss, unable to hear
anyone
You may be too far
away from other
members.
Move closer to other
members.
You may be in an
unfavorable position
(e.g., blocked
by buildings or
underground).
Move to an open and
at area, restart the
radio, and try again.
There may be
external disturbances
(e.g., electromagnetic
interference).
Stay away from
equipment that may
cause interference.
Radio keeps
transmitting
VOX may be turned
on, or the headset is
not properly installed.
Turn off the VOX
function. Ensure the
headset is properly
installed.
If the above solutions do not resolve your issues, or if you have other
queries, please contact your dealer for further technical support.