BTECH BF-F8HP-PRO - Page 60

60
Program
Channel-
Under
Channel
Mode
Busy CH.
Lockout
Off
The PTT button on
the channel is always
allowed.
On
Disables the PTT
button on a channel
that is already in use.
The transceiver will
sound a beep tone
and will not transmit
if the PTT button
is pressed when a
channel is already in
use.
Channel
Memory
CH001-CH100
Create new or modify
existing channels (1
through 100) so they
can be accessed from
MR/Channel Mode.
Channel
Delete
CH001-CH100
Delete the
programmed
information from the
specied channel (1
through 100) so it can
be reprogrammed or
left empty.
Program
Channel-
Under
VFO
Mode
Rx
Frequency
View the current
channel receiver
frequency and allow
changes. Input the RX
frequency using the
keypad, then press the
key to save.