BTECH BF-F8HP-PRO - Page 65

VISIT BAOFENGTECH.COM FOR DOWNLOADS AND HELP 65
Program
Channel-
Under
VFO
Mode
Busy CH.
Lockout
Off
The PTT button on
the channel is always
allowed.
On
Disables the PTT
button on a channel
that is already in use.
The transceiver will
sound a beep tone
and will not transmit
if the PTT button
is pressed when a
channel is already in
use.
Offset
Species the
difference between
the TX and RX
frequencies.
Direction
None
TX = RX (simplex).
Disables access to
repeaters in VFO/
Frequency mode.
Plus
TX will be shifted
higher in frequency
than RX.
Minus
TX will be shifted
lower in frequency
than RX.