BTG EKOS - Electromagnetic Emissions Declarations

Specifications
64
Electromagnetic Emissions Declarations
Guidance and manufacturer’s declaration – electromagnetic emissions
The Control Unit is intended for use in the electromagnetic environment specified below. The customer or
the user of the Control Unit should assure that it is used in such an environment.
Emissions text
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 2
The Control Unit must emit electromagnetic energy in order to perform
its intended function. Nearby electronic equipment may be affected.
RF emissions
CISPR 11
Class A
The Control Unit is suitable for use in all establishments other than
domestic, and may be used in domestic establishments and those
directly connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes, provided the following
warning is heeded:
Warning: This equipment/system is intended for use by healthcare
professionals only. This equipment/ system may cause radio
interference or may disrupt the operation of nearby equipment. It may
be necessary to take mitigation measures, such as re-orienting or
relocating the Control Unit or shielding the location.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Complies